Particle Board Flooring
We choose to stock a full range of Borg Manufacturing STRUCTAflor products including Yellow Tongue, Red Tongue, Yellow Tongue TERMIflor and R-Flor. STRUCTAFlor is structural grade particleboard sheet flooring for use in domestic and residential buildings.
Features & Benefits
- STRUCTAflor® has unique colour-coded tongues to identify thickness;
- Yellow tongue – 19mm for joist centres up to 450mm
- Red tongue – 22mm for joist centres up to 600mm
- Blue tongue – 25mm heavy duty for joist centres up to 600mm
- STRUCTAflor® has unique colour-coded wax to identify floor type;
- Yellow wax – General Purpose
- Red wax – Termite Treated
- Blue wax – R-Flor
- Inbuilt moisture protection
- Wax impregnated throughout
- Edge wax coated
- No need to seal uncut edges
- Produced in Australia from sustainably grown Australian plantation pine
Structural Ply
Carter Holt Harvey Plywood specialises in manufacturing and supplying both structural and non-structural plywood products with familiar brands such as Ecoply, Shadowclad and Shadowply. These brands are suitable for a range of applications including structural, exterior cladding, interior lining applications, DIY and packaging, among some of the many uses.
The recognised brands are trusted within the construction industry and are the “go to” plywood products for Architects, Builders and DIY professionals. With over 30 years of making plywood brands, there is a plywood product available to support most projects, whether used alone or accented with other building materials. CHH Plywood manufactures products that offer durability, strength and design flexibility.
Non-structural Ply
Non-Structural Ply – Not branded AS/NZS 2269:2004. Ideal for all projects where a structural rating is not required. Eg. For use under overlay flooring.
Available Sizes – 2400 x 1200
C/D PLYWOOD
9mm
12mm
15mm
17mm
Formply
This product is designed specifically for use as concrete formwork. The plywood is manufactured to the Australian Formwork plywood standard AS/6669 as well as to the Australian and New Zealand standard AS/NZS2269-Structural Plywood; with Type A bond and B grade or better veneer faces on both sides of each panel on our premium “A” grade product. Lesser grades not requiring a Class 2 finish or with one good side only are also produced.
Advantages, Features and Benefits of Plywood Formply products for formwork applications:
- The plywood is overlaid with a phenol impregnated paper to give excellent, off form finishes, if used as recommended. Edges of the panels are painted with a weather shield undercoat plus a top coat to act as a water repellent edge sealant.
- Formply products achieve a Class 2 or Class 3 off-form finish as per Australian standard, AS3610.
- Lightweight – the weight of a typical formwork panel (1800mm x 1200mm x 17mm) is 24kg.
- Reusable – when good site concreting practices are used, Formply products may be reused numerous times.
- Economical – Formply products are cost effective when compared to other concrete forming materials.
- Flexible – panels can be easily shaped to fit applications where custom sized panels are required.
- Overlay phenolic surface film density: 60/150gsm face and back.
- Excellent workability.
- Lowest available formaldehyde emission class level, E0.
Standard Available Dimensions and Thickness: Length: 2400mm or 1800mm, Width: 1200mm, Thickness: 17mm.
Cement Sheet
Prima Base
PRIMA base flat sheet provides a suitable substrate for texture coating systems. PRIMA base can be used as wall cladding for new homes, extensions, second storey additions, re-cladding older homes and other lightweight construction. PRIMA base can also be applied as an economical and easy-to-install bracing element for timber and steel wall frames.
Product Features
- Rebated edges for a seamless joint finishing prior to texture coating
- Ideal for lightweight construction
- Good Bracing capability
- Compatible with a wide range of acrylic finishes
- Tough to withstand impact loads
Product Description
- Blue primed board with rebated edges.
Prima Aqua
PRIMA Aqua is an autoclaved cellulose fibre cement sheet, with a special formulation for the needs of internal dry and wet area applications.
PRIMA Aqua has a smooth sanded, sealed surface and is suitable for tiling.
PRIMA Aqua has square rebated edges on both sides of its length for a neat flush joint.
Product Benefits
- Low maintenance
- Won’t warp
- Termite resistant
- Weather Resistant
- Water Resistant
- Fire resistant
- Impact resistant
- Excellent workability
- Structurally Strong
Prima Flex
PRIMA Flex is an eco-friendly multipurpose fibre cement board that can be used for both internal & external applications. It is the first choice in flat sheets among industry professionals.
PRIMA Flex performs exceedingly well when all aspects of good design detail and workmanship are met.
PRIMA Flex unique combination of physical and mechanical properties make it superior to other building boards:
Ceramic Tile Underlay
PRIMA CTU is a premium quality autoclaved cellulose fibre reinforced cement board manufactured from portland cement, top grade quality pulp from New Zealand, finely ground sand and water by Hume Cemboard Industries Sdn Bhd, an MS ISO 9001:2000 accredited company.
PRIMA CTU has superior fire performance and dimensional stability, which makes it an ideal substrate for ceramic tiles in wet and dry areas.
Manufactured with a pre-marked nailing pattern, sheets can be easily laid on existing timber flooring with minimal surface preparation.
Egger OS’Brace
OS’Brace is a structural panel designed and manufactured specifically for the Australian building and construction industry.
EGGER OS’Brace® is a three-layered, flat-pressed OSB panel of oriented strands. The panel is made of peeled round softwood from sustainable managed forests. Separate strands are processed for the core and surface layers. Special strand geometry and a high level of orientation of the surface strands in the direction
of the wood fibre optimises structural performance and physical appearance.
The orientation of the strands creates a performance greater than required for strength and stiffness properties between centre to centre of the joists, plus bracing solutions for up to 6 kn.